OMK-160E Intelligent Modulating Electric Actuator (1600Nm with Servo Controller)
Product Information
Brand:
OMKEE
Model number:
OMK-160E
Standard Torque/Speed:
45S/1600Nm
Protection Class:
IP68
Control Voltage:
AC110V AC220V AC380V
){kind=small}
Key Component Features & Material Engineering
1. Rugged ADC12 Aluminum Enclosure
The housing is constructed from heavy-duty ADC12 die-cast aluminum, treated with artificial aging and shot-blasting. It is finished with a thermo-sprayed powder coating thicker than 0.2 mm that safely withstands temperatures above 150°C, preventing corrosion in chemical or humid outdoor conditions.
2. Dual Signal Tracking & Zero-Gap Gear Joint
The OMK-160E tracks position using an imported Sakae (Japan) conductive plastic potentiometer (0–1000 $\Omega$, linearity error $L \pm 0.5\%$, electrical travel $355^\circ \pm 5^\circ$). To ensure real-time data accuracy, the assembly uses a spring-loaded anti-backlash gear mechanism that eliminates mechanical play and limits actuator hysteresis.
3. Forged Bronze Worm Gear & Spline Shaft Connection
The internal worm wheel is forged from a high-wear aluminum bronze alloy, matched with a heat-treated 40Cr alloy steel worm shaft finished with a black-oxide anti-rust plating. To eliminate the risk of structural neck shearing under heavy load torque, the output shaft connects to the worm wheel via a high-strength spline joint that distributes mechanical stress evenly.
4. Precision Gearbox & Low-Noise P6-Class Bearings
All reduction gears are precision-cut from high-grade quenched and tempered steel. The entire gear train is supported on both ends by P6-grade deep-groove ball bearings that follow the low-noise EMQ (ZV2) standard. The chamber is packed with imported Mobil grease and sealed with dual-lipped skeleton TC oil seals from the German brand Oubaisi to ensure a leak-free lifespan.
5. Intuitive External Stroke Limits
The OMK-160E uses a proprietary stroke adjustment mechanism. Field technicians can adjust the open and close limits directly using the external top adjusting shaft, making commissioning fast, safe, and precise.
Overall Dimensions and Performance Parameters
 |
OMK-100/160/250 | |||||||||
| Parameter\Performance | OMK-100 (AC110V) | OMK-100 (AC220V) | OMK-100 (AC380V) | OMK-160 (AC110V) | OMK-160 (AC220V) | OMK-160 (AC380V) | OMK-250 (AC110V) | OMK-250 (AC220V) | OMK-250 (AC380V) | |
| Motor Power | 120W | 120W | 90W | 140W | 140W | 100W | 140W | 140W | 100W | |
| Rated Current | 1.93A | 0.94A | 0.44A | 1.75A | 0.96A | 0.46A | 1.75A | 0.98A | 0.48A | |
| Standard Time/Torque | 30S/1000Nm | 30S/1000Nm | 30S/1000Nm | 45S/1600Nm | 45S/1600Nm | 45S/1600Nm | 75S/2500Nm | 75S/2500Nm | 75S/2500Nm | |
| Optional Time / Torque | 15S/500NM | 15S/500NM | 15S/500NM | - | - | - | - | - | - | |
| Turning Angle | 0~90° Adjustable | 0~90° Adjustable | 0~90° Adjustable | 0~90° Adjustable | 0~90° Adjustable | 0~90° Adjustable | 0~90° Adjustable | 0~90° Adjustable | 0~90° Adjustable | |
| Total Weight (kg) | 17.0 | 17.0 | 17.0 | 18.0 | 18.0 | 18.0 | 18.0 | 18.0 | 18.0 | |
| Cold Insulation Resistance (MΩ) | AC110V/220V/380V: 100 MΩ/500VDC | |||||||||
| Voltage-Withstand Class | AC110V/220V: 1500VAC one minute, AC380V: 1800VAC one minute | |||||||||
| Protection Class | Ip67 | |||||||||
| Installation Angle | 360° at any angle | |||||||||
| Electric Interface | One G1/2 Water-proof Cable Connector (For types with 4-20mA DC, etc. control signals, add one more) | |||||||||
| Ambient Temperature (℃) | -30℃~+60℃ | |||||||||
| Type of Control Circuit | Type A:Ordinal switch type; Type B:Passive signal feedback type; Type C:Resistance signal feedback type; Type D:Resistance signal and passive signal feedback type; Type E: Adjusting type; Type F: With position transmitter; Type G: DC current control type; Type H: AC 380V power control type | |||||||||
| Options of other function | ★ Stainless steel support, coupling
★Direct installation board, coupling (ISO5211 Standard) ★Over torque protector ★Heater for eliminating moisture |
|||||||||
Global Compliance and Applications
The OMK-160E complies fully with the JB/T8219-1999 manufacturing standard for industrial electric actuators, validated under official test report No. C16040-WT by the Shanghai Institute of Process Automation Instrumentation. OMKEE facilities maintain compliance with ISO 9001:2008 and the European Union CE Certification, ensuring complete compatibility with global B2B procurement standards.
Target Applications:
-
Energy Systems: Thermal power plants (steam turbine speed control loops) and hydro-generation stations.
-
Heavy Processing: Petroleum refineries, aggressive chemical processing, steel manufacturing mills, metallurgy, and paper mills.
-
Infrastructure: Municipal water treatment plants, automated sewage networks, marine shipbuilding, and large-scale power irrigation networks.
-
Light Industrial: Food and beverage processing, pharmaceutical cleanrooms, and automated HVAC/Building Automation Systems (BAS).
Recommended products
OMK-250H Part-Turn Electric Actuator (Three-Phase AC Control Type)
The OMK-250H is an ultra-high-capacity, industrial-grade part-turn electric actuator designed and manufactured by OMKEE. Engineered specifically for high-power three-phase AC grids (AC 380V), this model operates via an external phase-reversal circuit to manage the opening and closing of large 90° valves and heavy dampers.
OMK-250G Part-Turn Electric Actuator (Pure DC Control with Passive Contacts)
The OMK-250G is an ultra-high-capacity, industrial-grade part-turn electric actuator designed and manufactured by OMKEE. Engineered specifically for low-voltage DC power networks (DC 24V), this model operates via an external reversing circuit to manage the opening and closing of 90° valves.
OMK-250F Part-Turn Electric Actuator (2500Nm / Transmitter Feedback Type)
The OMK-250F is a professional, high-performance part-turn electric actuator engineered by OMKEE. Designed for massive fluid control infrastructure, it delivers an industry-leading output torque of 2500 Nm to reliably automate large-scale butterfly valves, ball valves, and industrial dampers.
OMK-250E Intelligent Modulating Electric Actuator (2500Nm with Servo Controller)
The OMK-250E is a flagship industrial-grade modulating electric actuator manufactured by OMKEE. Engineered for high-precision, continuous fluid regulation in large-scale pipeline networks, this model delivers a massive output torque of 2500 Nm to smoothly drive larger butterfly valves, ball valves, and heavy-duty dampers.
