OMK-20C Electric Actuator (200Nm / Potentiometer Feedback Type)
Product Information
Brand:
OMKEE
Model number:
OMK-20C
Standard Torque/Speed:
30S/200Nm
Optional Torque/Speed:
15S/100Nm
Protection Class:
IP68
Manufacturing Standard:
JB/T8219-1999
Control Voltage:
AC 220V, DC 24V, AC 110V, AC 380V
){kind=small}
Key Component Features & Material Engineering
1. Rugged Enclosure (ADC12 Die-Cast Aluminum)
The housing is constructed from heavy-duty ADC12 die-cast aluminum, treated with artificial aging and shot-blasting processes. It features an advanced thermo-sprayed powder coating with a thickness greater than 0.2 mm. This durable shell easily withstands continuous temperatures above 150°C without degradation.
2. High-Torque Motor with Heavy Safety Reserve
To handle erratic pipeline loads caused by fluid viscosity or system pressure surges, OMKEE engines the OMK-20C motor with a 1.3x to 1.5x torque safety reserve. Crucial parameters—such as motor temperature rise curves, rotational inertia, and insulation strength—are strictly tested. This design ensures the actuator can handle frequent start-stop cycles, even under full or overloaded conditions.
3. Spline Joint and Forged Worm Gear Drive
The inner copper worm wheel is forged from a high-performance aluminum bronze alloy, paired with a 40Cr alloy steel worm shaft that has undergone thermal tempering and black-oxide anti-rust plating.
Instead of fragile one-piece structures that snap under sudden rotational shocks, the OMK-20C relies on a high-strength spline connection to lock the output shaft and the worm gear together. This setup spreads heavy mechanical torque evenly across the joint.
4. Precision Gearbox & Low-Noise P6 Bearings
-
Premium Reduction Gears: All reduction gears are precision-cut from high-grade quenched and tempered steel, yielding high fatigue resistance, minimal wear, and low operating noise.
-
P6-Class Bearings: Both ends of the gear units are supported by P6-grade deep-groove ball bearings built to the low-noise EMQ (ZV2) standard. This controls internal vibration and resists sudden load shocks by focusing on optimal raceway surface roughness and ring roundness.
-
Lubrication & Seals: Features imported premium Mobil grease and authentic twin-lipped skeleton TC oil seals from the German brand Oubaisi to prevent any grease leakage.
5. Intuitive External Stroke Limits
The OMK-20C uses a proprietary stroke adjustment mechanism. Field technicians can adjust the open and close limits directly using the external top adjusting shaft, making commissioning fast, safe, and precise.
Overall Dimensions and Performance Parameters
 |
Parameter\Performance | OMK-20 | OMK-40 | OMK-60 | |||||||||
| DC24V | AC110V | AC220V | AC380V | DC24V | AC110V | AC220V | AC380V | DC24V | AC110V | AC220V | AC380V | ||
| Motor Power | 35W | 40W | 40W | 30W | 70W | 90W | 90W | 40W | 70W | 90W | 90W | 40W | |
| Rated Current | 3.57A | 0.65A | 0.37A | 0.15A | 5.13A | 1.12A | 0.57A | 0.29A | 5.13A | 1.18A | 0.60A | 0.29A | |
| Standard Time/Torque | 30S/200Nm | 30S/400Nm | 45S/600Nm | ||||||||||
| Optional Time / Torque | 15S/100Nm | 6S/150Nm 15S/200Nm | 60S/400Nm | ||||||||||
| Turning Angle | 0~90° Adjustable | ||||||||||||
| Total Weight (kg) | 8.0 | 8.5 | 9.0 | ||||||||||
| Cold Insulation Resistance (MΩ) | AC110V/220V/380V: 100 MΩ/500VDC | ||||||||||||
| Voltage-Withstand Class | AC110V/220V: 1500VAC one minute, AC380V: 1800VAC one minute | ||||||||||||
| Protection Class | Ip67 | ||||||||||||
| Installation Angle | 360° at any angle | ||||||||||||
| Electric Interface | One G1/2 Water-proof Cable Connector (For types with 4-20mA DC, etc. control signals, add one more) | ||||||||||||
| Ambient Temperature (℃) | -30℃~+60℃ | ||||||||||||
| Type of Control Circuit | Type A:Ordinal switch type; Type B:Passive signal feedback type; Type C:Resistance signal feedback type; Type D:Resistance signal and passive signal feedback type; Type E: Adjusting type; Type F: With position transmitter; Type G: DC current control type; Type H: AC 380V power control type | ||||||||||||
| Options of other function | ★ Stainless steel support, coupling
★Direct installation board, coupling (ISO5211 Standard) ★Over torque protector ★Heater for eliminating moisture |
||||||||||||
Global Compliance and Applications
The OMK-20C complies fully with the JB/T8219-1999 manufacturing standard for industrial electric actuators, officially certified under test report No. C16040-WT by the Shanghai Institute of Process Automation Instrumentation. Furthermore, OMKEE manufacturing plants maintain verified compliance with ISO 9001:2008 and the European Union CE Certification, making this product completely ready for direct export into world markets.
Target Applications:
-
Heavy Processing: Petroleum refineries, aggressive chemical processing, steel manufacturing mills, metallurgy, and paper mills.
-
Energy Systems: Thermal power plants (steam turbine speed control loops) and hydro-generation stations.
-
Infrastructure: Municipal water treatment plants, automated sewage networks, marine shipbuilding, and large-scale power irrigation networks.
-
Light Industrial: Food processing lines, pharmaceutical cleanrooms, and automated HVAC/Building Automation Systems (BAS).
Recommended products
OMK-60H Electric Actuator (Three-Phase AC Control Type)
The OMK-60H is a heavy-duty, industrial-grade part-turn electric actuator designed and manufactured by OMKEE. Engineered specifically for high-power three-phase AC grids (AC 380V), this model operates via an external phase-reversal circuit to manage the opening and closing of 90 ° valves.
OMK-60G Electric Actuator (Pure DC Control with Passive Contacts)
The OMK-60G is an industrial-grade, heavy-duty part-turn electric actuator designed and manufactured by OMKEE. Engineered specifically for low-voltage DC power networks (DC 24V), this model operates via an external reversing circuit to manage the opening and closing of $90^\circ$ valves.
OMK-60F Electric Actuator (600Nm / Position Transmitter Type)
The OMK-60F is an industrial-grade, heavy-duty part-turn electric actuator designed by OMKEE. Engineered for robust valve automation, this model features an advanced, built-in high-precision position transmitter. It receives standard AC or DC on-off switching commands to open or close the valve while continuously outputting a highly stable 4-20mA DC position feedback signal.
OMK-60E Intelligent Modulating Electric Actuator (600Nm with Servo Controller)
The OMK-60E is a flagship industrial-grade modulating electric actuator manufactured by OMKEE. Engineered for high-precision, continuous fluid regulation, this model delivers a powerful output torque of 600 Nm to smoothly drive larger ball valves, butterfly valves, and plug valves.
