OMK-60F Electric Actuator (600Nm / Position Transmitter Type)
Product Information
Brand:
OMKEE
Model number:
OMK-60F
Standard Torque/Speed:
45S/600Nm (peak torque 1040Nm)
Optional Torque/Speed:
6S/150Nm 15S/200Nm
Protection Class:
IP68
){kind=small}
Key Component Features & Material Engineering
1. Rugged Enclosure (ADC12 Die-Cast Aluminum)
The housing is constructed from heavy-duty ADC12 die-cast aluminum, treated with artificial aging and shot-blasting processes. It features an advanced thermo-sprayed powder coating with a thickness greater than 0.2 mm. This durable shell easily withstands continuous temperatures above 150°C without degradation.
2. High-Torque Motor with Heavy Safety Reserve
To manage sudden load spikes from pipeline pressure or thick fluids, OMKEE engines the OMK-60F motor with a 1.3x to 1.5x torque safety reserve. Crucial factors like motor temperature rise curves, rotational inertia, and insulation wear are strictly optimized. This guarantees dependable, frequent start-stop performance even under full or overloaded conditions.
3. Spline Connection & Forged Bronze Worm Gear
The inner copper worm wheel is forged from a high-wear aluminum bronze alloy, matched with a 40Cr alloy steel worm shaft that has undergone thermal tempering and black-oxide anti-rust plating.
Instead of weak one-piece shafts that shear under intense stress, the OMK-60F links the output shaft and worm gear using a heavy-duty spline connection. This choice spreads mechanical forces evenly across the drive joint.
4. Precision Gearbox & P6-Class Bearings
-
Premium Reduction Gears: Cut entirely from high-grade quenched and tempered steel, the gear train delivers exceptional wear resistance, high fatigue strength, and low noise. The reduction gearbox housing uses cast ADC12 aluminum for stabilized power transmission.
-
P6 Deep-Groove Bearings: Both ends of the gear units are held firmly by P6-grade deep-groove ball bearings built to the strict EMQ (ZV2) standard. This controls internal vibration and resists sudden load shocks by focusing on optimal raceway surface roughness, ring roundness, and correct retainer design.
-
Seals & Lubrication: Every unit is filled with imported high-performance Mobil grease and protected by dual-lipped skeleton TC oil seals from the German brand Oubaisi to guarantee a zero-leak system.
5. Quick External Stroke Calibration
The OMK-60F features an intuitive stroke limit device. Field technicians can quickly calibrate the exact open and close points via an external top adjusting shaft, making commissioning faster, simpler, and highly precise.
Overall Dimensions and Performance Parameters
 |
Parameter\Performance | OMK-20 | OMK-40 | OMK-60 | |||||||||
| DC24V | AC110V | AC220V | AC380V | DC24V | AC110V | AC220V | AC380V | DC24V | AC110V | AC220V | AC380V | ||
| Motor Power | 35W | 40W | 40W | 30W | 70W | 90W | 90W | 40W | 70W | 90W | 90W | 40W | |
| Rated Current | 3.57A | 0.65A | 0.37A | 0.15A | 5.13A | 1.12A | 0.57A | 0.29A | 5.13A | 1.18A | 0.60A | 0.29A | |
| Standard Time/Torque | 30S/200Nm | 30S/400Nm | 45S/600Nm | ||||||||||
| Optional Time / Torque | 15S/100Nm | 6S/150Nm 15S/200Nm | 60S/400Nm | ||||||||||
| Turning Angle | 0~90° Adjustable | ||||||||||||
| Total Weight (kg) | 8.0 | 8.5 | 9.0 | ||||||||||
| Cold Insulation Resistance (MΩ) | AC110V/220V/380V: 100 MΩ/500VDC | ||||||||||||
| Voltage-Withstand Class | AC110V/220V: 1500VAC one minute, AC380V: 1800VAC one minute | ||||||||||||
| Protection Class | Ip67 | ||||||||||||
| Installation Angle | 360° at any angle | ||||||||||||
| Electric Interface | One G1/2 Water-proof Cable Connector (For types with 4-20mA DC, etc. control signals, add one more) | ||||||||||||
| Ambient Temperature (℃) | -30℃~+60℃ | ||||||||||||
| Type of Control Circuit | Type A:Ordinal switch type; Type B:Passive signal feedback type; Type C:Resistance signal feedback type; Type D:Resistance signal and passive signal feedback type; Type E: Adjusting type; Type F: With position transmitter; Type G: DC current control type; Type H: AC 380V power control type | ||||||||||||
| Options of other function | ★ Stainless steel support, coupling
★Direct installation board, coupling (ISO5211 Standard) ★Over torque protector ★Heater for eliminating moisture |
||||||||||||
Global Compliance and Applications
The OMK-60F complies fully with the JB/T8219-1999 manufacturing standard for industrial electric actuators, certified under test report No. C16040-WT by the Shanghai Institute of Process Automation Instrumentation. Furthermore, OMKEE facilities maintain verified compliance with ISO 9001:2008 and the European Union CE Certification, ensuring product quality fits global B2B procurement standards perfectly.
Target Applications:
-
Heavy Processing: Petroleum refineries, aggressive chemical processing, steel manufacturing mills, metallurgy, and paper mills.
-
Energy Systems: Thermal power plants (steam turbine speed control loops) and hydro-generation stations.
-
Infrastructure: Municipal water treatment, automated sewage networks, marine shipbuilding, and large-scale power irrigation networks.
-
Light Industrial: Food and beverage processing, pharmaceutical cleanrooms, and automated HVAC/Building Automation Systems (BAS).
Recommended products
OMK-60H Electric Actuator (Three-Phase AC Control Type)
The OMK-60H is a heavy-duty, industrial-grade part-turn electric actuator designed and manufactured by OMKEE. Engineered specifically for high-power three-phase AC grids (AC 380V), this model operates via an external phase-reversal circuit to manage the opening and closing of 90 ° valves.
OMK-60G Electric Actuator (Pure DC Control with Passive Contacts)
The OMK-60G is an industrial-grade, heavy-duty part-turn electric actuator designed and manufactured by OMKEE. Engineered specifically for low-voltage DC power networks (DC 24V), this model operates via an external reversing circuit to manage the opening and closing of $90^\circ$ valves.
OMK-60E Intelligent Modulating Electric Actuator (600Nm with Servo Controller)
The OMK-60E is a flagship industrial-grade modulating electric actuator manufactured by OMKEE. Engineered for high-precision, continuous fluid regulation, this model delivers a powerful output torque of 600 Nm to smoothly drive larger ball valves, butterfly valves, and plug valves.
OMK-60D Electric Actuator (600Nm / Dual Feedback Type)
The OMK-60D is an industrial-grade, heavy-duty part-turn electric actuator engineered by OMKEE. Designed for mid-to-large pipeline automation systems, this model delivers a powerful rated output torque of 600 Nm (with peak torque capability reaching up to 1040 Nm).
