Technical Advantages & Materials
1. Robust Housing & Sealing
-
Material: ADC12 Die-cast aluminum alloy.
-
Finishing: Shot-blasting and powder coating (>0.2mm thickness) with thermal resistance exceeding 150°C.
-
Sealing: Equipped with imported German Oberst double-lip TC oil seals and O-rings.
2. High-Precision Transmission System
-
Worm Gear: Forged aluminum bronze alloy.
-
Output Shaft: Made of 40Cr heat-treated steel with a black rust-proof finish.
-
Spline Connection: Uses a reliable spline interface between the output shaft and gear to prevent the torsional fractures common in integrated structures.
-
Gears: Precision-machined tempered steel featuring low noise, high strength, and superior wear resistance.
3. Industrial-Grade Motor & Bearings
-
Motor Design: Engineered for 1.3x - 1.5x rated torque to handle frequent starts and overloads. Features optimized thermal rise and rotational inertia.
-
Bearings: All bearings utilize EMQ (ZV2) P6-grade standards, ensuring minimal play and ultra-low vibration/noise.
4. Advanced Control & Lubrication
-
Stroke Control: Proprietary internal stroke adjustment device via a top "adjusting shaft" for easier and more precise commissioning.
-
Lubrication: Pre-filled with premium Mobil synthetic grease for lifetime reliability.
Technical Parameters Table
| Parameter | Specification |
| Control Voltage | DC24V / AC110V / AC24V / AC220V / AC380V |
| Operating Temperature | -20°C to +60°C (Customization available for ultra-low temps) |
| Control Signal | On-Off / Active Contact |
| Feedback Signal | Active position signals for Full Open / Full Close |
| Electrical Interface | G1/2 Waterproof cable connector |
| Dielectric Strength | 1500V/min (AC110V/220V); 1800V/min (AC380V) |
Overall Dimensions and Performance Parameters
 |
Parameter\Performance\Type (Power) | DC24V | AC110V | AC24V | AC380V | AC220V |
| Motor Power | 13W | 10W | 10W | 6W | 10W | |
| Rated Current | 1.28A | 0.24A | 1.5A | 0.07A | 0.16A | |
| Standard Time/Torque | 20S/50Nm | |||||
| Optional Time / Torque | 4S/20Nm 10S/30Nm | 60S/50Nm | ||||
| Turning Angle | 0~360° Adjustable | |||||
| Total Weight (kg) | 2.5 | |||||
| Cold Insulation Resistance (MΩ) | AC110V/220V/380V: 100 MΩ/500VDC | |||||
| Voltage-Withstand Class | AC110V/220V: 1500VAC one minute, AC380V: 1800VAC one minute | |||||
| Protection Class | Ip67 | |||||
| Installation Angle | 360° at any angle | |||||
| Electric Interface | One G1/2 Water-proof Cable Connector (For types with 4-20mA DC, etc. control signals, add one more) | |||||
| Ambient Temperature (℃) | -30℃~+60℃ | |||||
| Type of Control Circuit | Type A:Ordinal switch type; Type B:Passive signal feedback type; Type C: Resistance signal feedback type; Type D: Resistance signal and passive signal feedback type; Type E: Adjusting type; Type F: With position transmitter; Type G: DC current control type; Type H: AC 380V power control type | |||||
| Options of other function | ★ Stainless steel support, coupling
★Direct installation board, coupling (ISO5211 Standard) ★Over torque protector ★Heater for eliminating moisture |
|||||
Quality Assurance & Testing Processes
Our products undergo a rigorous 4-step testing protocol before shipment:
-
Torque Testing: Every unit is tested to ensure a 1.3x safety margin under both rated and negative voltage.
-
High-Voltage Insulation: 1500V/1min breakdown test to ensure electrical safety.
-
Load Cycle Test: Batch samples undergo 48-hour continuous full-load operation.
-
IP68 Waterproof Test: Units are submerged and pressurized (0.2Mpa) for 1 minute to ensure zero leakage.
Global Application Areas
The OMK series is widely utilized across the following industries:
-
Energy: Hydroelectric & Thermal Power Plants.
-
Resources: Petroleum, Chemical, and Metallurgy.
-
Infrastructure: Water Treatment, Shipbuilding, and HVAC Building Automation.
-
Processing: Food Processing, Pharmaceuticals, and Paper Mills.
